SPRAY – 225 PTFE Coating

SPRAY - 225 | PTFE Coating

It is a colloidal dispersion of White Dry Lubricants like PTFE etc. in Aerosol form. This is a clean, non-staining, non-oily lubricant which makes it an ideal choice where incidental contact is likely to create problems.

Description

AREA OF APPLICATION

Boundary Lubrication: For lubrication of surfaces in which the relative motion is too small to allow the formation of an oil film
Wear-in: Protection against galling and seizure of newly machined surfaces e.g. cams, slides and ways, valves, sleeves, splines, ball pivots
Press Fitting: To reduce pressures required and prevent galling and seizure e.g. antifriction bearings, splines, keyed shafts, sleeves
Release Agent: Prevents material from sticking together as in moulding and casting
Cold Metal forming: To reduce friction and heat, lengthen life and prevent pick-up on punching and forming dies and all types of cutting tools.

METHOD OF APPLICATION

It should be applied by gently pressing the knob of the aerosol tin keeping the face of the knob such that the extension tube connected to the knob opens directly in front of the component to be lubricated

BENEFITS

Forms a tenacious dry film of lubricant that offers a very low coefficient of friction
Does not leave any oily residue etc
Offers good resistance to moisture, dirt, dust, fluff etc
Forms a non-conductive film

CHARACTERISTICS	TYPICAL VALUES
Appearance	Smooth
Color	Transparent to Milky White
Copper Strip Corrosion	Negative
Drying Time	8 – 10 minutes
Film Type	Dry
Temperature Range	-40° C to +175° C
Propellant	Eco-friendly blend of Propane & Butane

PACKING: 500ml Eco-friendly Aerosol Spray Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.